HP NetRAID-4M Controller - Manual (Page 181)

8-9
Working with Multi-level Containers
These three containers make up the stripe set of volume sets. The
Total Size
column indicates that the stripe set of volume sets is
200MB (megabytes), which is the total size of the two underlying
volume sets. The Stripe Size column indicates that the size of each
stripe is 32KB (kilobytes).
HPN0> container list
Executing: container list
Cluster Num Total Oth Stripe Scsi Partition
Dr Partner Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ------- ----- ------ ------ --- ------ ------- ------ -------------
0 0 Stripe 200MB 32KB None
0 63 Volume 100MB 2:01:0 64.0KB: 100MB
0 62 Volume 100MB 2:02:0 64.0KB: 100MB
Understanding a Stripe Set of Volume Set Creation in a NetWare
Environment
When creating a multilevel container of stripe sets on a NetWare
server, you specify the container IDs for the containers from which
you want to create the multilevel stripe set. If NetWare is using any
of these containers, an appropriate message displays. This message
indicates that one or more of the containers you specified is in use by
NetWare. The message directs you to remove any NetWare volumes
and partitions from these containers. You can then create a
multilevel container of stripe sets on a NetWare server.
After you create a multilevel container of stripe sets on a NetWare
server, you must run the
list devices command on the
NetWare console and then create the necessary NetWare disk
partitions and volumes.
For information on how to create partitions and volumes, see the
appropriate NetWare documentation.
For information on how to display the NetWare console remotely on
the NT client running FAST, see the Flexible Array Storage Tool User’s
Guide.
Understanding a Stripe Set of Volume Set Creation in a UNIX
Environment
On UNIX systems, the message displayed after you execute the
container create mstripe command includes the root special
file associated with the newly created multi-level stripe set.