HP NetRAID-4M Controller - Manual (Page 286)

12-8
Command Line Interface User’s Guide
message reporting is set for the DriveLetterChange event type and
the FileSystemChange event type.
HPN0> mail show message /all=TRUE
Executing: mail show message /all=TRUE
Message : DriverLetterChange
To : [email protected]
Subject : HP NetRAID-4M controller message
Body : A drive letter assignment change occurred on
container (%container%).%nl%Controller :
"%adapter%"%nl%Computer : %host%%nl%TIME : %time%%nl%DATE :
%date%%nl%%nl%
Message : FileSystemChange
To : [email protected]
Subject : HP NetRAID-4M controller message
Body : The file system was either created on or removed from
container (%container%).%nl%Controller :
"%adapter%"%nl%Computer : %host%%nl%TIME : %time%%nl%DATE :
%date%%nl%%nl%
Testing Mail Message Reporting
The CLI allows you to test the e-mail message server by sending a
test e-mail notification message to a specified recipient. To send a
test e-mail message, use the
mail test command. This command
requires that you previously specify a computer as an e-mail server
using the
mail set server command.
How to Test the Mail Server
This section provides an example that describes how to test the e-
mail server.
To display the name of the computer on which the e-mail server is
set, use the
mail show server command, as in the following
example. In the example, the Mail Server item indicates that Ares is
the name of the computer on which the e-mail server is set.
HPN0> mail show server
Executing: mail show server
Mail Server : Ares