HP NetRAID-4M Controller - Manual (Page 240)

9-32
Command Line Interface User’s Guide
To work with removing one or more spare disks from all containers
managed by a controller, you must understand:
■ The remove global spare disk attributes you can specify
■ How to remove global spare disks
The following sections discuss each of these topics.
Understanding the Remove Global Spare Disk Attributes You can
Specify
You use the container remove global_spare command to
remove spare disks from one or more containers managed by a
controller. The
container remove global_spare command
has no attributes.
Understanding How to Remove Global Spare Disks
This section provides an example that describes how to remove glo-
bal spare disks.
Before removing one or more spare disk from all containers
managed by a controller, use the
container show spare
command to display information about your spare disks, as in the
following example. In the example, the Scsi C:ID:L column
indicates that SCSI devices 2:02:0 and 2:03:0 are assigned as global
spare disks.
HPN0> container show spare
Executing: container show spare
Container Scsi C:ID:L
_________ ___________________________
GLOBAL 2:02:0 2:03:0
0 --- No Devices Assigned ---
1 --- No Devices Assigned ---
To remove one or more spare disks from all containers managed by a
controller, use the
container remove global_spare
command, as in the following example. In the example, SCSI devices
(2,2,0) (2,3,0)
are removed as global spare disks.
HPN0> container remove global_spare (2,2,0) (2,3,0)
Executing: container remove global_spare (CHANNEL=2,ID=2,LUN=0)
(CHANNEL=2,ID=3,LUN=0)