HP NetRAID-4M Controller - Manual (Page 55)

4-5
Working with Disks
the Vendor ID column indicates that ACME is the name of the
vendor for device 2:01:0. (Note that the example eliminates some
items in the
disk list display to make the example readable on
this page.)
HPN0> disk list /full=TRUE
Executing: disk list /full=TRUE
C:ID:L Device Type Removable media Vendor-ID Product-ID Rev
------ ----------- --------------- --------- ------------ -----
2:01:0 Disk N ACME ST39102LW 0006
Displaying the Product ID
The product ID attribute identifies the model number of a device.
To display the product ID of the devices connected to a controller,
use the
disk list command, as in the following example. Note
that the Product ID column appears only if you specify the /full
switch with the disk list command. In the following example,
the Product ID column indicates that ST39102LW is the Product ID
for device 2:01:0. (Note that the example eliminates some items in
the
disk list display to make the example readable on this page.)
HPN0> disk list /full=TRUE
Executing: disk list /full=TRUE
C:ID:L Device Type Removable media Vendor-ID Product-ID Rev
------ ----------- --------------- --------- ------------ -----
2:01:0 Disk N ACME ST39102LW 0006
Displaying the Revision Number
The revision number attribute identifies the revision number of a
device connected to a controller.
To display the revision number of the devices connected to a
controller, use the
disk list command, as in the following
example. Note that the Rev column appears only if you specify the
/full switch with the disk list command. In the following
example, the Rev column indicates that 0006 is the revision number
for device 2:01:0. (Note that the example eliminates some items in
the
disk list display to make the example readable on this page.)
HPN0> disk list /full=TRUE
Executing: disk list /full=TRUE
C:ID:L Device Type Removable media Vendor-ID Product-ID Rev
------ ----------- --------------- --------- ------------ -----