HP NetRAID-4M Controller - Manual (Page 21)

2-1
2
Introducing the Command
Line Interface
You can invoke the CLI by doing the following:
■ Accessing the CLI from the MS-DOS Prompt
■ Accessing the CLI from the Windows NT and Windows 2000 Start
Button
■ Accessing the CLI from the Flexible Array Storage Tool Window
■ Accessing the CLI from the NetWare Server Console
■ Accessing the CLI from the UNIX Prompt
The following sections describe each access method.
Note: The CLI displays status information in the title bar of a
DOS command prompt window when it executes an
asynchronous command. The status information includes a
percent number that indicates percentage completion. Note
that no status information appears in the FAST utility’s CLI
window. On NetWare, the status information appears in a
different window. On UNIX, the status information appears
at the bottom of the CLI window.
Accessing the CLI from the MS-DOS Prompt
To access the CLI from the MS-DOS prompt, enter the afacli
command, as in the following example:
C:\afacli