HP NetRAID-4M Controller - Manual (Page 50)

3-26
Command Line Interface User’s Guide
Reconditioning the Battery
To recondition the battery, use the controller
battery_recondition command, as in the following example:
HPN0> controller battery_recondition
Executing: controller battery_recondition
Note: On Windows NT and Windows 2000 (basic disk only),
if you have enabled the
battery_good_finished_recondition e-mail
messaging feature, an e-mail message indicating that the
battery is fully charged will be sent to a designated
recipient. See the
mail set message command in the
Command Line Interface Reference Guide, for information on e-
mail messaging.
❒