Buhler 535 - Manual (Page 120)

435/485/535
3-9
F3-127
Outset Inset
Wheels, Tires and Articulation Blocks
Wheel Installation
Determine the tire size and wheel configuration to be
used on the tractor and follow the proper installation
procedure from the methods detailed below .
CAUTION: USE EXTREME CAUTION WHEN
REMOVING AND HANDLING WHEELS. USE A
CARRIER FOR HANDLING WHEELS.
CAUTION: STOP THE ENGINE AND ENGAGE THE
PARK BRAKE AND ARTICULATION LOCK BEFORE
WORKING ON TIRE INSTALLATION.
CAUTION: BLOCK THE WHEELS OF THE TRACTOR
WHEN JACKING UP THE AXLES.
Single wheels
Tire configurations approved for single wheel use may
be positioned with the dish of the wheel inset or outset
depending upon the operator’s choice .
CAUTION: WITH THE WHEEL INSET, THE TRACTOR
WILL BE LESS STABLE ON HILLSIDES. FOR HILLY
TERRAIN, IT IS RECOMMENDED THAT THE TIRES
BE OUTSET.
Torque the wheel mounting nuts () .
Torque Value: 70 N·m (525 in-lbs .)
Wrench size: ¼" ( .250")
F4-65
1 1
Section 3 - Operation
Wheel Installation - Single
Single Wheel Configurations