Ab c d, 34 a b c d – Buhler 535 User Manual

Page 48

Advertising
background image

435/485/535

3-9

Section 3 - Operation

Cab Controls & Instruments

F3-17

OFF

HEAD

LOWER

ETHER

UPPER

Master Light Switch

The master light switch () has 4 positions .

Position A - Full counterclockwise is off .
Position B - Headlights and parking lights
Position C - Headlights and parking lights and lower

work lights

Position D - All work lights, headlights and parking

lights .

Hazard Warning Light Switch

Push the top of the rocker switch (2) to activate the
hazard lights . Push the bottom of the switch to turn
the hazard lights off .

Multi Function Switch

The lever type multifunction switch (3) operates the
horn, turn signals, headlight flash and is used to select
high or low beam .

Turn Signals - Move the lever upward to indicate a
right turn, or downward to indicate a left turn . The turn
signal warning light on the warning light bar will flash
when the signals are operated . The opposite warning
light on the warning light bar will also light, but will
remain steady . The turn signal must be manually
returned to neutral after the turn is completed .
An audible warning will sound if the turn signals are
left on for more than two minutes

Headlights (High/Low Beams) - With the master light
switch in positions B, C or D, the multifunction switch
lever can be pulled toward the steering column to
change the headlights between high and low beam .

Headlight Flash - With the master light switch in
position A (Off), the multifunction switch lever can be
pulled toward the steering column to flash the high or
low beams of the headlights .

Horn - Press the button on the end of the multifunction
switch lever to activate the horn .

3

4

A

B

C

D

F3-18

OFF

HEAD

LOWER

UPPER

2

1

A

B

C

D

Ether Cold Start Button

The ether cold start button (4) is used to inject ether,
a highly combustible substance, into the engine
intake manifold . Ether will ignite in the engine at
temperatures far below those needed to ignite diesel
fuel .

Use the ether to assist the engine starting in
temperatures at or below 0° C (32° F) .

Note: See cold-weather starting on page 3-51 for

detailed operation.

Advertising
This manual is related to the following products:

485, 435