Buhler 535 User Manual

Page 164

Advertising
background image

435/485/535

4-3

Operation 38

Clean the Engine Air Precleaner

The engine air precleaner must be checked to be
sure that debris is not causing any obstruction at the
precleaner inlet .

To inspect the inlet to the precleaner, loosen the two
hose clamps () attaching boot (2) to the air cleaner
tube (3) and the precleaner (4) .

Slide the boot toward the front of the tractor on the
tube . Inspect the inlet (5) of the precleaner, and
remove any debris accumulated in this area .

After the precleaner is cleaned, reinstall the boot and
tighten the hose clamps securely .

Loosen the clamp (6) and disconnect the aspirator
hose (7) where it connects to the precleaner aspirator
tube .

Inspect by looking down inside the precleaner aspirator
tube and remove any accumulated debris . Check that
the flapper door (8) is operating properly .

F4-34

F4-35

F4-34

3

4

1

2

5

6

8

7

Section 4 - Lubrication & Maintenance

Every 500 Hours

Advertising
This manual is related to the following products:

485, 435