Buhler 535 - Manual (Page 186)

435/485/535
4-53
Section 4 - Lubrication & Maintenance
As Required
F4-80
F4-81
Operation 68
Turn Signal/Hazard Lights Bulb Replacement (Roof)
To replace a roof turn signal/hazard light bulb, remove
the two retaining screws () and remove the lens cover
(2) . Remove the bulb (3) . Replace the bulb using the
reverse procedure .
Replacement bulb, P/N: 529068
Operation 69
Brake/Road Lights Bulb Replacement (Fender)
To replace a brake/road light bulb, remove the two
retaining screws () and remove the lens cover (2) .
Remove the bulb (3) . Replace the bulb using the
reverse procedure .
Replacement bulb, P/N: 86537133
Operation 70
Extremity Lights
To replace an extremity light bulb, remove the two
retaining screws (4) and remove the lens cover (5) .
Remove the bulb (6) . Replace the bulb using the
reverse procedure .
Replacement bulb, P/N: 529068
Operation 71
HID Work lights (Front)
To replace a front HID work light bulb, remove the
two screws (7) and withdraw the lamp unit from the
body work . Disconnect the plug (8) by turning anti-
clockwise . Remove the three screws (9) and the
retaining ring (0) . Remove the bulb () . Replace
the bulb using the reverse procedure taking care not
to touch the bulb glass .
Replacement bulb, P/N: 86032753
WARNING: THIS LAMP UNIT OPERATES AT HIGH
VOLTAGE AND SHOULD BE ISOLATED BEFORE
MAINTENANCE IS CARRIED OUT.
Replacement bulbs can be purchased from your
Buhler Versatile dealer .
1 2
3
4 5
6
F4-82
7
8 10
11
9