Protective shielding – Buhler 535 User Manual
Page 25
2-6
435/485/535
F2-13
F2-12
F2-11
Protective Shielding
Engine Side Covers
The side covers protect the operator from hot and/or 
moving parts . Do not operate the tractor unless the 
engine side covers are in place and latched .
 
 
 
Starter Solenoid Shield
The shield covers the starter solenoid electrical 
connections to prevent accidental contact . The 
shield must be installed whenever the batteries are 
connected to the electrical system . Always disconnect 
battery before removing the shield .
DANGER: NEVER ATTEMPT TO START THE TRACTOR
BY BYPASSING THE WIRES TO THE STARTER
MOTOR.
Battery Cover
The battery cover protects the batteries from damage 
and the electrical connections from accidental contact . 
The battery cover must always be in place and latched 
during operation .
WARNING: INSTALL ALL PROTECTIVE SHIELDS
BEFORE STARTING OR OPERATING THE TRACTOR.
Section 2 - General Information
Protective Shielding