Buhler 535 - Manual (Page 184)

435/485/535
4-5
Section 4 - Lubrication & Maintenance
Indicated by Warning Light
F4-58
Clean the air cleaner body with a lint-free towel before
installing the element .
Inspect the element seal () before installing . Cracks
or chips in the element sealing rubber indicates a new
element must be installed .
Install the air filter back into the canister . Be sure
the seal on the end of the filter fully contacts the air
cleaner body . The wing nut (2) has a small seal (3)
on the inner face, and the seal should be in good
condition before the wing nut is tightened . If the seal
is damaged on the wing nut, replace it . Tighten the
nut securely .
F4-54
1
2
3