Buhler 535 - Manual (Page 172)

435/485/535
4-39
Section 4 - Lubrication & Maintenance
Every 1000 Hours
F4-54
F4-53
Inspect the seal () on both new elements before
installing . Cracks or chips in the element sealing
rubber indicate that the element is defective and
must be replaced .
Install the elements into the canister . Be sure that
the seal on the end of the filters fully contacts the air
cleaner body . The wing nuts (2) have a small seal (3)
on the inner face which should be in good condition
before the wing nuts are tightened . If the seals (3)
are damaged, replace them . Tighten the wing nuts
securely .
Replacement outer (Primary) element P/N: 86034042
Replacement inner (Safety) element P/N: 86034041
NOTE: Replacement elements can be obtained from
your Buhler Versatile dealer.
1
2
3