Buhler 535 - Manual (Page 177)

4-44
435/485/535
F4-90
F4-89
Operation 58
Check the Transmission Mounts
Check the rubber transmission mounts and mounting
hardware for condition and torque on both the
Synchromesh and powershift transmissions .
Synchromesh transmission
The Synchromesh transmission is held in the front
frame of the tractor by four bottom mounts () and two
top mounts (2) . Inspect the mounts for deterioration
and wear . Torque the lower mounting bracket bolts
(3) to 224 N .m (65 ft-lbs) and the upper mounting
bracket bolts (4) to 397 N .m (293 ft-lbs) . Torque the
mount bolts (5) to 280 N .m (205 ft-lbs) .
1407 Twindisc Powershift transmission
The 407 Twindisc Powershift transmission is held
in the front frame of the tractor by four bottom
mounts (6) and two top mounts (7) . Inspect the
mounts for deterioration and wear . Torque the lower
mounting bracket bolts (8) and the upper mounting
bracket bolts (9) to 224 N .m (65 ft-lbs) . Torque the
mount bolts (0) to 280 N .m (205 ft-lbs) .
CAT TA22 Powershift transmission
The CAT TA22 Powershift transmission is held in the
front frame of the tractor by four bottom mounts ()
and two top mounts (2) . Inspect the mounts for
deterioration and wear . Torque the lower mounting
bracket bolts (3) and the upper mounting bracket
bolts (4) to 224 N .m (65 ft-lbs) . Torque the
mount bolts (5) to 280 N .m (205 ft-lbs) .
If the transmission mounts require replacement,
contact your Buhler Versatile dealer .
2
5
4
1
3
5
6
8
9 7 10
10
F4-104
F4-89
F4-90
Section 4 - Lubrication & Maintenance
Every 1500 Hours or Yearly
F4-104
15
11
13
12 14 15