Buhler 535 - Manual (Page 160)

435/485/535
4-27
F4-69
F4-68
F4-32
Operation 32
Check the Weight Kit (Optional) Hardware Torques
Check the hardware securing the front, upper rear and
rear weight brackets and weights to the tractor .
Front weight kit - Check the ten flanged nuts ()
securing the bracket to the tractor and torque to
633 N·m (467 ft-lbs) .
Check the weight mounting bolts (2) securing the
weights to the weight bracket and torque to 480 N·m
(354 ft-lbs) .
Check the tie rod nuts (3) and torque to 633 N·m
(467 ft-lbs) .
Rear weight kit
Check the eight bolts (4) securing the bracket to the
tractor and torque to 633 N·m (467 ft-lbs) .
The rear weights are mounted using the same
procedure as the front weight kit . Check the weight
mounting bolts (2) securing the weights to the weight
bracket and torque to 480 N·m (354 ft-lbs) .
Check the tie rod nuts (3) and torque to 633 N·m
(467 ft-lbs) .
Upper rear weight kit (not shown)
Check the six bolts (5) securing the bracket to the
tractor and torque to 633 N·m (467 ft-lbs) .
The upper rear weights are mounted using the
same procedure as the front weight kit . Check the
weight mounting nuts (2) securing the weights
to the weight bracket and torque to 480 N·m
(354 ft-lbs) .
Check the tie rod nuts (3) and torque to 633 N·m
(467 ft-lbs) .
Wrench size: 30 mm
Operation 33
Check the Wheel Hardware Torque
All wheel mounting hardware must be checked for
proper torque . The following chart shows wheel
torques, based on wheel configuration .
Wrench size: 30 mm
NOTE: For identification of particular hardware
components, see Operation 75 later in this section.
1
3
2
Configuration Torques
Singles Wheel to Hub Nuts
70 N·m (525 ft-lbs .)
Standard and Special
Row Crop Drum Duals Wheel to Hub Nuts
70 N·m (525 ft-lbs .)
Drum Style Triples Wheel to Hub Nuts
70 N·m (525 ft-lbs .)
Center Wheel to Outer
Wheel Nuts
70 N·m (525 ft-lbs .)
Section 4 - Lubrication & Maintenance
Every 250 Hours
4
5