Buhler 535 - Manual (Page 37)

3-8
435/485/535
F3-6
Section 3 - Operation
Cab Features
6. Dampener Adjustment
The firmness of the ride can be adjusted as follows:
Soft - Rotate the control knob clockwise to decrease
the firmness of the seat bounce .
Firm - Rotate the control knob counterclockwise to
increase the firmness of the seat bounce .
7. Swivel Adjustment
The seat can be adjusted to:
• Lock in the forward position .
• Lock in one position to the left of center .
• Lock in one of four positions to the right of center
(increments of 7° for a total of 28° rotation)
• Provide a free swing position without locking in any
position .
To adjust the seat swivel:
 . Move the swivel control lever partially to the
rear .
2 . Swing the seat to the desired position .
3 . Release the lever to lock the seat into position .
NOTE: Moving the control lever fully rearward will
provide the free swing position.
8. Lumbar Adjustment
Adjust as follows:
Increase support - Rotate the wheel down .
Decrease support - Rotate the wheel upwards .
9. Armrest Angle Adjustment
Rotate the roller on each armrest to adjust to the
desired angle .
Both armrests can also be raised up to the full vertical
position for easy access .
7
6
9
8
Section 3 - Operation
Cab Features - Seating