Forward operator control console, Ab c d 1, Ignition switch – Buhler 535 User Manual

Page 47: Engine shut down override switch, Rotary beacon switch (optional), Ashtray and cigarette lighter

Advertising
background image

3-8

435/485/535

F3-19

OVER

RIDE

ACC

OFF

STOP

RUN

START

Forward Operator Control Console

The following description details the controls located
in the forward operator’s console .

Ignition Switch

The ignition switch () has four key positions .

Position A - Accessories “ON,” Engine “OFF”
Position B - Engine and electrical equipment “OFF”
Position C - Warning lights and instruments “ON .”

Engine RUN position .

Position D - Starter motor operates

Engine Shut Down Override Switch

The rocker switch (2) allows the operator to override
the automatic shut down . See “Operating the Engine”
for details on the automatic shut down feature . The
switch should only be used to move the tractor to a
safe area for investigation and repair . Push the top of
the switch to override the shut down system . Push the
bottom of the switch to return to normal (automatic
shut down) operation .

Rotary Beacon Switch (optional)

The rocker switch (3) controls the operation of the
beacon . Push the top of the switch to operate the
beacon . Push the bottom of the switch to turn the
beacon off . Tractors without rotary beacons have a
blanking plate in place of the switch .

Ashtray and Cigarette Lighter

The ashtray (4) can be tilted out for convenient use .
To clean the ashtray, pull it upward and out from the
dash and empty .
The cigarette lighter (page 3-4) is located on the
left of the right hand console . Push the lighter in to
activate . It will automatically pop out when heated .
Return lighter to it’s socket after use .

A

B

C

D

1

F3-16

OVER

RIDE

ACC

OFF

STOP

RUN

START

2

3

4

Section 3 - Operation

Cab Controls & Instruments

Advertising
This manual is related to the following products:

485, 435