JLG 450A_AJ Series II Service Manual User Manual
Page 24
SECTION 1 - SPECIFICATIONS
1-8
– JLG Lift –
3121259
DO NOT OVERGREASE END BEARINGS OR HOUSING OUTER SEAL
MAY BLOW AND CAUSE DAMAGE TO EQUIPMENT.
3. Wheel Bearings (2WD Only)
Lube Point(s) - Repack
Capacity - A/R
Lube - MPG
Interval - Every 2 years or 1200 hours of operation.
4. Wheel Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 17 oz. (0.5 L) - 1/2 Full
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of
operation; change every 2 years or 1200 hours of
operation.
5. Hydraulic Return Filter
Interval - Change after first 50 hrs., every six months,
or 300 hrs. thereafter, or as required by Condition
Indicator.
6. Hydraulic Charge Filter
Interval - Change after first 50 hrs. and every 6
months or 300 hrs. thereafter or as indicated by
Condition Indicator.
7. Hydraulic Tank
Lube Point(s) - Fill Cap
Capacity - 27 gallons (102 liters); 23.6 gal. (89 liters)
to the Full line on the sight gauge.
Lube - HO
Interval - Check Level daily; Change every 2 years or
1200 hours of operation.