2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 106)

Station types 8.3
106
NsAdmin
This section isn't implemented yet.
Assistant
After selecting concrete user is on the right side of tab Assistant displayed list of users who belong
to the same group as selected user. For these users you can see its login types and there are also
displayed all set rights for application Assistant. This view is useful when you need to set similar
rights within group of users. Table of rights is divided into sections with following meaning.
Users management – It enables to view and change settings of another users.
Phone books management – It enables to view and change phonebooks of another users.
Call history management – It enables to view call history of another users.
Telephones management – It enables to view and change telephone settings of another users.
Stations management – It enables to view and change station settings of another users.
Global configuration management – It enables to view and change global configuration settings.
Operator management – It enables to view and manage operator settings.
Alarms management – It enables to view and change alarms settings.
SMS management – It enables to view and manage SMS messages of another users.
8.3 Station types
Station types creation
This tab will be displayed after clicking on the menu Routing – Station types . Station types are
used for easier setting of group of stations. On the left side of the menu is situated list of created
station types and on the right side of this menu you can set up selected station type. On the left side
you can use context menu with following options:
Add – With this option you can add another station type.
Delete – It deletes selected station type.
Rename – It renames selected station type.
Properties
The tab Properties consists of many tabs, which are described in the separate chapter. This tab is
exceptional, because almost for all its parameters you can use hierarchical structure. This structure
and description of all parameters is situated in the chapter 9.1 Setting up the properties tab.
8.4 Stations
Stations creation
This tab is shown after clicking on the menu Routing – Stations . On the left side is situated list of
created stations and on the right side you can set up selected station. On the left side you can also
use context menu with following options:
Add – With this option you can add stations. After clicking on this option you will see dialogue box
from Figure 1. You have to set the name of the station. If you choose the name, which already exists,