2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 6)

Connection to the PbX 1.3
6
Size of indent – It defines size of indent for xml trace.
Colours
Setting colours of ports – Here you can define colour of each type of the virtual port or completely
disable this function.
Setting colours of tabs – Here you can define background color for tabs or completely disable this
function.
Setting colours of stations – Here you can define colour of each type of the station (SIP, external,
...) or completely disable this function.
Setting colours of logins – Here you can define colour of each type of the user login or completely
disable this function.
View – This part enables displaying of information which can be used during trace analyse using
database.
Show name of actual window – If this option is checked name of actual window is shown on the
right bottom corner.
Show object Id – If this option is checked Id of actual object is shown on the right bottom corner.
For using set configuration you have to use button OK and for exiting dialogue without saving
changes you have to use button Cancel.
1.3 Connection to the PbX
Icons of connection section
Following figure presents all icons of this section.
Figure 1 View of icons from connection section of the configuration tool.
Meaning of icons is described from left to right.
Connect to PbX – It is used for connecting configuration tool to the PbX via selected connection.
Create group – With this option you can create group of PbXs on the same level as selected object
or nested into the existing group.
Create PbX – With this option you can create PbX on the same level as selected object or nested into
the existing group.
Create connection – With this option you can create specific connection to the selected PbX.
Properties – This option is used for changing properties of the selected object. In the case of group
ou can change only its name. For cases of PbXs and particular connections is this dialogue described
below.
Delete – With this option you can delete selected object.
Auto login – With this option you can set automatic connecting to the PbX via selected connection
after starting configuration tool. Only one automatic connection could be active at the same time.
When you select another, the old one is canceled.