5 modems, Routing objects 7.2 – 2N PBX 2N NetStar - Configuration Manual v2.6.0 User Manual
Page 84
Routing objects
7.2
84
Figure 2 View of configuration menu of routing object Ring tabs – tab Advanced.
7.2.5 Modems
Modem connection
Connection to the PbX via modem is used for remote access in the cases when you can't use TCP/IP
connection. Modem you can also use for remote access to the database and for receiving actual
system traces via application TraceView. This type of access is limited by its data rate and it isn't
recommended in locations, where you can use TCP/IP access. The PbX NetStar supports in this
firmware version ISDN modem with protocol X.75. Following figure can be used as example of the
configuration for remote access to the PbX via modem.
Figure 1 View of the configuration for remote access to the PbX via modem.