2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 9)

Connection to the PbX 1.3
9
Figure 4 View of the properties setting of the connection.
Connecting to the PbX
After automatic or manual initiation of connecting to the selected PbX is displayed dialogue from
figure 5. In this dialogue you can find information about connected PbX and also information about
version of firmware of the PbX (if detected). You can also see information about last knoen error of
connection and in the case of automatic connection attemps also remaining time to another attempt.
If you want to try connect before timeout expiration, you can use button Try again. Button Cancel is
used for leaving this dialogue.