2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 89)

Routing objects 7.2
89
None – Routing object doesn't react to timeout expiration or end of the played tone.
Hang up – After timeout expiration or playing whole tone is call hung up in routing object with cause
no. 16 – normal call clearing.
Call destination – After timeout expiration or playing whole tone is call routed according to
configuration of section Destination.
Play whole tone – With this option you can enable playing whole tone independently of preset
timeout.
Destination – This section defines destination for next routing after timeout expiration or playing
whole tone.
Connect according to time conditions – With this option you can enable relay activation according
to the selected time conditions. Relay is activated always when at least one time condition is valid. If
this option isn't checked preset time conditions aren't used.
Figure 1 View of configuration menu of routing object Binary I/O used as switch.
Setting up of Detector
Detector status – This parameter displays actual state of detector (active, deactive, unknown). If