2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 63)

Time parameters 6.8
63
ring pattern is then used with selected melody.
Signal BRI – This parameter sets ring tone signaling for the ISDN terminals. This function has to be
supported by used ISDN terminal or it will be ignored .
Durations – Here you can set ring pattern via two columns and four rows. For each row which you
want to use, you have to set column ON and column OFF. First one represents time of the ring
current and second one represents timeout before resuming on the other row. Both parameters are
set in milliseconds.
6.8 Time parameters
6.8.1 Date and time
In this menu you can find actual date and time of your PbX including time zone. Figure 1 shows basic
view of the menu Date and time. Date is shown in the format year/month/day and time in 24
hours format.
Figure 1 View of the menu for date and time setting.
For changing actual settings you can use button Set date and time, which induce dialogue box from
figure 2. Within this dialogue box you can change date by using calender or by arrows in the window.
Number values for year and day you can type directly from keyboard.
Time you can also enter directly from keyboard or by using arrows. Always applies limitation for
hours 0-23 and for minutes and seconds 0-59.
Time zone is chosen from the list.