2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 121)

Setting the properties tab 9.1
121
l) Customer
On the tab Customer you can find parameters for functions which are implemented for specific
customers and its meaning will be introduced only marginally. This tab is divided into the three
sections. Within the first one you can define supported method of called party number sending. This
number is used for billing. Within other sections you have to set up specific called party
identification, which will be transmitted via DSS1 message.
Redirecting number – It is used within DSS1 messages during communication with Ericsson
exchanges for billing. You have to set up Scheme (Number or URI), Subtype (Unknown, Internal,
Local, National, International) and Number/URI (specific number or address).
Facility – It is used within DSS1 messages during communication with Nokia exchanges for billing.
You have to set up Scheme (Number or URI), Subtype (Unknown, Internal, Local, National,
International) and Number/URI (specific number or address).