2N NetStar Admin manual - Manual (Page 115)

115
changing, profile activation, etc.).
Description of Selected Services
For some services, more parameters should be defined in addition to progress tones or
messages. Below are some of them:
Private call
Here set the destination type in the field to (the calling user Destination Nothing
settings are used) or (select a router). Router
Call parking
Here define the . The default value is set to 180s. The parked Maximum parking time
user hears the Music on Hold. After the time limit, the parking place is cleared and the
call returns to the extension that parked it before. The parked user hears the alert
tone.
Set presence
You can use an SMS message (not a call) to set the presence text. The SMS is routed
to the text router where the text section is removed that is used for SMS routing to the
service. The default code is . The rest of the text is used as a new Set presence *61
presence text of the SMS sending user. If the user has an active profile at the time of
sending, the presence text is assigned to the profile.
Add to conference
Use this service to add held subscribers to a conference. Two extensions at least have
to be on hold for a correct function (speech slots are used). Now use the Add to
service. The default code is**0#*. The two held extensions and the caller conference
now join the conference.
Call to conference room
Use this service to call a conference for a defined conference room. Having dialled the
service code (
by default), you are invited to enter the conference room access *2#
code. Enter the code and then a 'hash'. If the calling user has the right to call together
the conference room subscribers, the other users are called subsequently. For more
information refer to the
section. Conference Rooms