2N NetStar Admin manual - Manual (Page 265)

265
Time
When you are in the initial screen for time configuration, press 1 and 3. You will get
into the
menu. For correct configuration, push 3 to set the time zone and Time setting
then enter the number according to your location. Then you can modify time and date
using options 1 and 2.
You can also use an NTP server is available on the LAN. After pressing option 4 set the
IP address or domain name of the NTP server (one DNS at least has to be set in the IP
settings).
Connection of Configuration Tool to NetStar
Start the NetStar configuration tool. In case no connection to NetStar has been
created, create a new one.
Create a new group for the customer by choosing the Folder icon and the On the
option and name the new group. In our case it is called . same level Test
Once a new group is created, right click on it and go to the Create PBX – To group