2N NetStar Admin manual - Manual (Page 189)

189
Figure: View of Binary I/O - Switch Configuration Menu
Example
Switch activation/deactivation by incoming SMS.
To activate the switch, route the incoming SMS using the text router to the particular
binary object of the switch type where the
parameter is set to Action at pick up
. The other actions are ignored. To deactivate the switch, route the SMS with Connect
a different text through the text router to a different binary object than that used for
activation. This binary object, however, is assigned to one and the same binary source.
But the
parameter is set to this time. Action at pick up Disconnect