2N NetStar Admin manual - Manual (Page 56)

56
USSD
USSD commands
In this section, you can enter the USSD commands (codes) for pre-paid SIM recharging
or credit info display, for example. Click on
to enter the required command and New
on to execute the last-entered command. Press to terminate the Repeat Cancel
current command processing. Refer to the Answer window for the command effect on
the USSD code.
Network name – the parameter shows the name of the network to which the
SIM card is currently logged in.
Command – shows the last-entered USSD command.
State – shows information on the command processing.