2N NetStar Admin manual - Manual (Page 14)

14
1.4 Configuration Menu
Main menu
After a successful connection to the PBX, the configuration part of the application is
displayed. The main menu of this view is shown in figure below and contains the
following options:
Administrator
Logout PBX – use this option to logout the configuration tool from the PBX
and return to the previous menu for another connection as described
above.
Connect/Disconnect – use these options off-line to connect/disconnect
the configuration tool to/from the PBX.
Save changes – here save all changes made since the last save.
Undo changes – here cancel all changes made since the last save in a
menu.
Settings – use this option to invoke a global setting dialogue as described
in Chapter
. 1.2 About Application
Language – choose one of the supported languages.
Exit – use this option to exit the configuration tool.
Trace
Load trace from file – use this option to load a trace from the file, thus
clearing the previous one.
Add trace from file – use this option to load a trace from the file and add
it to the existing one. You can interconnect traces for easy analysis.
Save trace to file – use this option to save the current on-line trace to a
file. The configuration tool always saves an entire trace independently of
whether the filter is being applied or not.
Trace analyser – here open the trace analysis window.
PBX
Upgrade – select this option to display a firmware upgrade dialogue.
Having been chosen, the firmware file is uploaded into the PBX and
unpacked. After a restart, the new firmware is used.
Import logs from PBX – select this option to get an easy access to the
PBX logs without using other applications. You can import
logs or All
selected logs only ( ). Selectively
All – after selecting a directory, the config.db and aoc.db files and the
contents of the internal/log and /var/log directories are imported.
Selectively – select this item to display a dialogue for downloading
selected logs from the PBX. The user can enter the files through a storage
as defined in the
menu. Global Data – Storage Manager
Restart PBX – use this option to initiate the PBX restart.
Restart ústředny – Volba umožňuje restart ústředny.
Restore factory settings – use this option to restore the factory default
values. Choose one of the two options available in the dialogue window and
press OK twice to confirm the selected action.
Wizards
Activation wizard – for details refer to the next chapter, 1.5 PBX
. Activation
Import/export company structure – here invoke the company structure