2N NetStar Admin manual - Manual (Page 15)

15
import/export dialogue. The csv and xml files are supported.
Database import – click on this option to display the database importing
window. Select From file or From PBX. If you choose From PBX, all the
PBXs available for database import will be displayed. Use the Rule
parameter to specify which of the original settings should not be
overwritten by database import. The option is available in the off-line mode
only.
Database export – click on this option to export the PBX database into an
xml file. The option is available in the off-line mode only.
Help – select this option to start the help in the chosen language.
Figure: View of Configuration Tool Main Menu
Figure above also includes all configuration menu icons. Icon meanings from the left:
Logout PBX – use this icon to logout the configuration tool from the PBX and
return to the previous menu for another connection as described above.
Connect/Disconnect – use these icons off-line to connect/disconnect the
configuration tool to/from the PBX.
Save changes – use this icon to save all changes made since the last save.
Undo changes – use this icon to cancel all changes made since the last save in
a menu.
Language – flags are used to mark the configuration tool language versions.
Windows
On the left-hand side of the configuration tool you can find the TreeView where you can
choose a menu item to be configured. The selected menu then opens on the right-hand
side and is mostly divided into two subwindows; one for selecting and the other for
configuring an object. The configuration is divided into tags for easier orientation. All
the above mentioned windows are shown in the figure below.