2N NetStar Admin manual - Manual (Page 88)

88
DHCP Server
The DHCP server is used exclusively for assigning IP addresses and other parameters
to SIP terminals with the specified MAC address in NetStar.
The menu consists of two basic sections. A field for setting ranges of subnet IP
addresses to be assigned is in the left part of the screen. More parameter settings for
the selecetd subnet are available on the right.
Subnet
The context menu provides the following options:
Add new subnet – use this option to display a dialogue to define the required
subnet parameters, see below.
Change range – use this option to edit the existing subnet range. It has the
same function as a double click on the selected subnet.
Delete subnet – use this option to delete the selected subnet from
configuration.
You can specify the following in this dialogue:
IP address range
Subnet mask
Default gateway
Preferred DNS server
Backup DNS server
The first obligatory step is to enter the range of IP addresses. The remaining
parameters need not be filled in immediately if you unselect them. You can edit the
parameters later in the
section. Subnet properties
Subnet options
The context menu provides the following options:
Add subnet mask – the option is only active for subnets with no mask defined
so far.
Add default gateway – the option is only active for subnets with no default
gateway defined so far.