Inbound calls – 2N NetStar Admin manual User Manual
Page 278
Advertising
278
1.
2.
Save your new configuration to NetStar using the icon.
Now NetStar is properly configured to pass calls from the PBX to GSM or PSTN
through a bundle of GSM ports.
Inbound calls
We need to take two steps for inbound calls.
Create an incoming router responsible for routing calls into the connected PBX
and assign the router to the virtual port through which NetStar is connected to
the PSTN (GSM ports).
Set the DISA function for processing incoming calls.
Create router
Go to
, click on the right mouse button and choose
.
Routing – Routers
Add
Advertising