12 scheduled tasks, Database back–up, Pbx restart – 2N NetStar Admin manual User Manual

Page 131: Umts boards restart, Pbx keepalive

Advertising
background image

131

6.12 Scheduled tasks

This menu helps you schedule your database back-up, PBX restart, UMTS board restart
or  sending  keepalive  messages  informing  of  the  PBX  operation.  Click  on  Add  in  the
context menu to add an event. Select the event type, name and repetition mode in the
next window.

Database back–up

This  option  helps  you  schedule  your  database  back-up  intervals  easily,  especially  in
case  of  incidental  data  loss  or  configuration  changes.  The  database  is  stored  in  the
physical storage defined in the Storage manager in pre-set intervals. The storage can
be a MMC card or a shared directory on a network disk. The database is stored with a
timestamp designating the storing date/time and the current firmware version for later
use.

PBX restart

Deferred  PBX  restart  is  applied,  e.g.,  in  upgrades  as  the  PBX  cannot  be  restarted  as
soon as the new firmware is downloaded due to being currently used.

UMTS boards restart

Use this option to schedule the restart of the UMTS boards.

PBX Keepalive

Keepalive messages are used for PBX operation checks. To send the keepalive reports
successfully,  set  the  Event  Reporter  in  the  Network – Supervision services  menu.
Set the event type to PBX keepalive for the object created. The Event reporter is a
licensed function.

The following options are available in the Scheduler menu:

Type – select the type for the event scheduled.
Name – enter the name for the event scheduled.
Schedule task – select the repetition frequency for the event scheduled.

Not scheduled – the event is not scheduled in this mode.
Daily – specify in how many days the event shall be repeated. 
Weekly – specify in how many weeks and on which days the event shall be
repeated. 
Monthly  –  specify  on  which  days  or  days  of  which  weeks  of  the  selected
month(s)the event shall be repeated. 
Once only – select the execution date for the event scheduled.

In time – define at what time the event shall be executed on the selected day.
We  recommend  you  to  select  a  time  off  the  PBX  peak  load  (i.e.  off  working
hours) for all events except for the keepalive messages.

 

Advertising