ADS-TEC RAP/RAC1000 User Manual - Manual (Page 106)

IT Infrastructure RAP/RAC1000
106
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
D ATE & TIME
Date and time can be configured via Date & Time.
The device is not equipped with a Real Time Clock. Therefore, settings are reset to the last
saved values after a power failure.
The time is automatically synchronized by activation and input of the IP address of the NTP
server.
Time zone:
The correct time zone is set in the Drop Down menu.
Daily saving of current time:
If the option is ticked, the current system time will be saved.
Activate time synchronization with timer server (NTP):
The function allows for synchronization of date and time by means of three different NTP
servers. Once an NTP server responds successfully, this one will be used.
For this purpose activate the checkbox next to the option and enter the IP address of the
NTP server.
Manual setting of date & time:
Here the current date and time can be set manually.
For taking over changes, click on Activate.
Hinweis:
Date and time settings are important for the creation of certificates, the evaluation of
event log entries and for time-based rules. Without activated NTP server, the current time
gets lost after a power failure, i.e. it has to be reset manually