ADS-TEC RAP/RAC1000 User Manual - Manual (Page 161)

IT Infrastructure RAP/RAC1000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
161
C ONFIGURATION
All interfaces can be configured separately under menu item „Configuration 
Prioritization“.
A CTIVATION
Prioritization for an interface is started by ticking „Activate prioritization“ and defining a
maximum bit rate. In this case, i.e. if classes have not yet been defined, the device
transmits all types of data up to the selected bit rate and rejects the excessive data.
Note:
Prioritization is applicable to outbound packets only.
A
DDING CLASSES
As already mentioned before, real prioritization is divided into classes. In this connection
the different types of data are allocated to one or more classes. The individual classes are
saved in a table. They can be deleted or their position can be changed by clicking the
known buttons.
Note:
The position is of major importance for later prioritization since the individual classes are
sequentially processed for each data packet and the class is used at the first hit.