ADS-TEC RAP/RAC1000 User Manual - Manual (Page 188)

IT Infrastructure RAP/RAC1000
188
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Note:
If a SIM card is saved on a device with a currently used firmware and then inserted in a
device with older firmware, all new parameters of the new firmware are deleted
automatically since those are not available on the old firmware. This also applies to the
data saved on the SIM card.
(Only applicable to RAP/RAC!) A configured SIM card cannot be exchanged between two
different device types. If e.g. the configuration is saved on an RAP111x onto the SIM
card, the SIM card will not be readable if it is inserted in an RAC111x. Rewriting of the
card however will be possible at any time.
RAP/RAC devices with an older hardware version however cannot provide this function
despite the available card slot. In such cases the SIM card functions are not visible.