ADS-TEC RAP/RAC1000 User Manual - Manual (Page 34)

IT Infrastructure RAP/RAC1000
34
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Note:
If the login prompt does not appear ensure that the device has been connected via a
RJ45/optical cable. Otherwise, connect the device to a PC (Device HOST connector <> PC
LAN adapter).
If there still is no connection to the firewall login prompt check your proxy and local
firewall settings. It is often the case that local subnet addresses (e.g. 192.168.x.x) are
diverted to a proxy server. In this case it is possible to select the “Bypass proxy server for
local addresses” check box and enter the address spaces in question.