ADS-TEC RAP/RAC1000 User Manual - Manual (Page 118)

IT Infrastructure RAP/RAC1000
118
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
8.7.3 S ONSTIGES
Re-measure Interval:
The Re-measure Interval indicates when a device shall re-measure its surrounding. The
measurement is only performed when no Client is logged in. If a Client is logged in, a new
trial is started after Retry Interval seconds. During measurement, the AP is not available
for WLAN Clients.
Retry Interval:
If a Client is logged in, the re-measuring process is restarted after this interval. If no
Clients are logged in at the Access Point, the latter can start the re-measuring process.
Note:
The Re-measure function can be deactivated in both boxes with the value 0.
Permitted radio range:
Here the regional settings for the transmission power valid in the respective countries are
made.
Warning:
It is the duty of the operator of the device to select the correct regional settings.