ADS-TEC RAP/RAC1000 User Manual - Manual (Page 90)

IT Infrastructure RAP/RAC1000
90
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
8.3.2 WLAN-1 P ARAMETER
Using this menu, the Access Point interfaces can be set up. All interfaces have their own
setup options, which have an impact on how the interface works. Additionally, unused
interfaces may be disabled.
Note:
Depending on the equipment version of the device, 2 WLAN interfaces might be available.
WLAN1 (A CCESS P OINT ) 2.4GH Z -802.11 B / G :
The checkbox next to Enable interface must be ticked so that changes and settings can be
made with respect to the interface.
Operational mode: Switching / Selection: Access Point / Client (this option is not available
on the RAC111x or RAC151x model.
Hide SSID: The SSID (network name) will not be displayed with this function enabled.
Network name (SSID): Name of the network. Default setting: ads. The SSID may contain
up to 32 characters.
Note:
Valid characters are: a-z, A-Z, 0-9 and the special characters: . _ - ? $ @ ! { } [ ] ( ) + #
; , < > | : * ~ % $ & / =