ADS-TEC RAP/RAC1000 User Manual - Manual (Page 133)

IT Infrastructure RAP/RAC1000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
133
HOST
Note:
At least two classes must be created if you want to prioritise a specific data flow. The first
class to be created gets the lowest priority value in the Priority option box and so specifies
the prioritised data traffic. The second class specifies the remaining data flow and should
get a value lower than the maximum bit rate. This ensures that the prioritised data flow of
the first class will have sufficient bandwidth.
Note:
A numerically small value in the Priority input box symbolises the shortest delay for
Ethernet packets while a high value corresponds to a long delay!