ADS-TEC RAP/RAC1000 User Manual - Manual (Page 120)

IT Infrastructure RAP/RAC1000
120
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Note:
If the DHCP server supports dynamic DNS updates after RFC2136, this will lead to a valid
DNS entry for the given host name on the DNS server.
Note:
If the interface is configured with DHCP, the manually made settings are dynamically
overridden here.
IP
ROUTING
Dynamic routing type:
In this setting you can set up a specific protocol for IP routing to be used. Available for
selection are
RIP:
Frequently used protocol, which allows creating routing tables for routers.
OSPF:
Open Shortest Path First is the RIP protocol successor.
Both: Is using both protocol types.
IP routing is used in order to forward IP packets, which belong to a certain network, to a
gateway computer. A network consists of an IP address and the corresponding subnet
mask. The values must be entered under Destination and Subnet mask. Additionally, the
Gateway must be specified if both networks to be connected are based on different
protocols.