ADS-TEC RAP/RAC1000 User Manual - Manual (Page 131)

IT Infrastructure RAP/RAC1000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
131
C LIENT MONITORING
The integrated client monitoring functionality is used for monitoring terminals for their
availability in the network. The clients to be monitored are added to the Current
monitoring table and will be checked for availability by ICMP messages in regular cycles.
A client to be monitored can initiate an activity if it is no longer available. This action could
e.g. be to send an email to the respective person in charge.
Action:
up /down WLAN-1/2
Using this setting, the WLAN adapter is shut down if the Ethernet terminal can no longer
be reached via ICMP. If the ICMP is now carried out at the gateway of the AP, the AP can
recognise that it has no longer an uplink available. The WLAN interface will shut down and
log off all clients. Otherwise it might happen that a client logs in, although the AP has no
connectivity, while the client should rather look for another AP.
Note:
If you want to check the response time for ICMP responses you can pop up a tooltip on the
LED icon in the State box.
Note:
A change in state will trigger an E-mail notification if a valid address is saved in the optional
E-mail server and E-mail address boxes.