ADS-TEC RAP/RAC1000 User Manual - Manual (Page 95)

IT Infrastructure RAP/RAC1000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
95
WLAN1 (A CCESS P OINT & A CCESS C LIENT ) 5 GH Z – 802.11 A (ETSI):
If the WLAN 802.11a mode or in case of the client, the 802.11a/b/g mode is configured,
the following options change:
Hinweis:
The Option „Outdoor“ is just available in Access Point Mode. The Option „Deactivate DFS“
is available in both Modes.
Outdoor:
Must be enabled if the Access Point is part of a radio connection in the outdoor area.
Certain channels of the 5GHz band may not be used outdoors, and will be excluded by this
option. This option is of no importance for Access Clients.
Disable DFS:
You may disable DFS if the Access Point is NOT used outdoors. You may also manually set
up channels 36, 40, 44 and 48 as fixed channels, in this case. Additionally, the permissible
maximum output power is reduced. In client mode, in contrast to that, DFS may also be
disabled for outdoor use.
Use 5.6 Ghz Channels:
The channels 120.124 and 128 will be activated. When the DFS function is enabled, a
response time (Channel Availability Check Time) of 10 minutes must be observed.