ADS-TEC RAP/RAC1000 User Manual - Manual (Page 130)

IT Infrastructure RAP/RAC1000
130
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
E NABLE SNMP TRAP GENERATION :
Allows to enable/disable the SNMP trap function. With the function enabled, events like
e.g. Link Up / Link Down events can be received and traced back. The firewall can trace
back, from which device the message originated, because its IP address is included.
SNMP Trap Community Name:
Here you enter the Community Name for traps.
SNMP Trap Receiver IP:
Enter the IP address of the trap receiver here.
W
EBSERVER
Access to the Access Point web interface using the protocols http or https can be set up
using the Webserver > Access control menu.
The web server integrated in the Access Point for configuration can only be reached using
the activated protocols.
Note:
You should assign an individual certificate to each Access Point for an optimum in security.