ADS-TEC RAP/RAC1000 User Manual - Manual (Page 62)

IT Infrastructure RAP/RAC1000
62
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
7.2.5 D EFINITION OF A NEW R ULE SET ON L AYER 3
The configuration of rule sets for filter layer 3 will be described on the following pages.
Note:
If you want to configure Layer 2 after the filter level, use the chapter „Define new rule
set on bridged Ethernet interfaces (Layer 2)“ on the previous pages.
Warning:
Before configuring a rule set on layer 3, ensure the option check box “Activate IP
Router Functionality”, located at the path Basic Settings User Interface. is
checked. Confirm any modifications to this setting by selecting “Activate”.
Select the menu item: Define new rule set.
Click the Add button and subsequently select Definition of a new Rule Set.
Then assign a name and a description to the new rule set.
Note:
Use a different name for each rule set if possible. Do not use umlauts as they will lead to
error messages.
Confirm by clicking Next.