ADS-TEC RAP/RAC1000 User Manual - Manual (Page 94)

IT Infrastructure RAP/RAC1000
94
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Use fixed Access Point BSSID:
If this option is enabled, you can enter the MAC address of an Access Point. This option is
helpful with Access Points sharing the same SSID, because the respective device can still
individually be addressed.
Confirm this action subsequently with Apply settings.
S
TATE
Access client view:
The state display of the WLAN-1 interface shows data traffic characteristics. The display
can be updated by using the Reload button.