ADS-TEC RAP/RAC1000 User Manual - Manual (Page 199)

IT Infrastructure RAP/RAC1000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
199
C ONFIGURATION OF THE S EAMLESS R OAMING B EHAVIOUR
The change threshold for Seamless Roaming is entered under „Configuration  Adv.
WLAN  Roaming WLAN-1“. This threshold indicates when a connection quality of a
WLAN interface is preferred to the connection quality of the other interface.
Example:
Both interfaces are configured and currently registered at an Access Point.
Connection quality of WLAN-1: 23 dB
Connection quality of WLAN-2: 38 dB
The device can recognise the second interface as the „better one“ only if the Seamless
Roaming change threshold is smaller than 15dB.
D
EACTIVATING THE S EAMLESS R OAMING M ODE
The operation mode can again be changed under „Configuration  IP Configuration“
(Standard Transparent Bridge).
Note:
After this adaption, the settings of the WLAN-1 interface are maintained. The second
WLAN interface is again configured as before activation of the Seamless Roaming mode.