ADS-TEC RAP/RAC1000 User Manual - Manual (Page 40)

IT Infrastructure RAP/RAC1000
40
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
7.1.3 WLAN-1 C ONFIGURATION
The next dialogue is used to configure all relevant basic settings for WLAN operation.
Access Point Mode
O PERATING M ODE :
Use this option to switch between the two operating modes Access Point and Access
Client.
Note:
The RAC (Access Client) does not offer an operating mode option. It is permanently set to
Access Client mode.
Access Point:
In Access Point mode, the device serves as a network gateway for other wireless devices
(clients).
Access Client:
In Access Client mode, the device tries to establish a connection to an Access Point in
order to establish a connection with the network.
N
ETWORK NAME (SSID):
Use this option to assign a name to your wireless network. We recommend not using any
names that allow conclusions with regard to your company, department or the type of data
transmitted. Any clients that want to establish a connection with this Access Point need to
know this network name.
Default setting is: ads
Note:
The SSID may consist of a maximum of 32 characters. Valid characters are: a-z, A-Z, 0-9,
valid special characters: . _ - ? $ @ ! { } [ ] ( ) + # ; , < > | : * ~ % $ & / =