ADS-TEC RAP/RAC1000 User Manual - Manual (Page 138)

IT Infrastructure RAP/RAC1000
138
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
8.9.2 F ACTORY DEFAULTS
This menu item allows restoring the factory defaults by the software.
The default settings of the device will be loaded by clicking on the Restore to factory
defaults button.
The following dialogue window will appear while loading the factory defaults.
Using the try to reconnect button. If the update has been done successfully, the
software update is displayed.
Warning:
All settings will be reset. All created filter rules will be deleted. Should you not be able to
get back to the web interface after resetting to factory defaults, adapting the IP address
of your PC accordingly might be required.
The following defaults are set:
• IP 192.168.0.254
• User name: admin
• Password: admin